
These capacitors use a polypropylene film dielectric, with electrodes formed from an extremely thin metallized layer deposited by vacuum evaporation. The design eliminates any risk of electrolyte leakage, and the self‑healing properties of the dielectric prevent permanent short‑circuits.
The cases are metallic, while the covers are made from self‑extinguishing plastic (UL 94 V‑2). Each capacitor is sealed by mechanically edging the case over the cover, ensuring an air‑tight closure.
An insulating container between the capacitive element and the metal case, combined with the resin‑encapsulated winding, provides exceptional electrical safety (improved earthing insulation) and excellent resistance to vibration.
Capacitors in the 16.27 / 16.25 / 16.33 / 16.26 series are equipped with an integrated safety device. This protection system complies with EN 60252‑1/A1 (safety protection class S2) and UL 810, offering reliable protection against fire hazards or lightning‑induced faults. The device has been tested according to UL 810 with fault currents ranging from 5 A to 10,000 A.
Additionally, these capacitors are certified in accordance with CSA 22.2 No. 790‑M1985.
Specification
| Capacitance | 50uF 475VAC +/-5% Motor Run |
|---|---|
| Brand | Ducati Energia |
| Part # | 416.33.5664 |
| Dimensions1 | 122mm x 55mm |
| Connector | Double Quick Connect (4 terminals) |
| Housing Material | Aluminium |
| Construction | Metallized Polypropylene Film |
| Manufactured In | Romania |
1Dimensions do not include connector or stud (if included)
Official Product Specs PDF
In the event of a permanent short‑circuit, the fault current causes the dielectric to decompose and generate gas. The resulting internal pressure lifts the section of the lid where the terminals are mounted, breaking the internal connections and stopping current flow (see Fig. 8). This safety mechanism prevents the capacitor from exploding or catching fire.
The device is manufactured in different sizes to match each capacitor model, ensuring fast and effective intervention under both high and low short‑circuit conditions (up to 10,000 A).
Because the patented safety system operates only in the central area of the plastic cover (see Fig. 8), the capacitor can be mounted using the standard “Dog‑house Clamp” system commonly used in the U.S.A.
Key Features
- Low‑loss, non‑inductive winding for stable performance
- Self‑healing dielectric to prevent short‑circuit failure
- Compact size and lightweight construction
- No risk of electrolyte leakage
- Safety protection class: S2
RoHS Compliance
In accordance with the 2011/65/EU (RoHS2) directive and subsequent amendments, all capacitors produced by Ducati Energia S.p.A. since June 2005 are fully compliant with RoHS requirements.



Reviews
There are no reviews yet.